Filter
Top Products
Change the Handset Display Name and PIN Code
Mitel
®
5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Page 15
Change the Handset Display Name and PIN Code
After configuring the handsets, change the default user name and the default PIN code to
prevent unauthorized access. Note that the handset PIN code and the Configurator web
interface password are independent of each other. If you change the handset PIN code, it does
not affect the Configurator web interface password.
To change the Display Name:
1. From Idle mode, press the OK key, select Settings, and then press the OK key.
2. Select System settings and press the OK key. When prompted for a PIN code, enter
the PIN code (default 0000), and then press the OK key.
3. Select Handset settings and press OK.
4. Select Handset name and press OK.
5. Use the Erase key to delete the existing default name (for example, Handset 1).
6. Enter the handset display name using the dial pad keys. To enter spaces and special
characters, press Options and then press Insert symbols. Ensure that the handset
display name is the same as the name that appears in the 5000 CP database for the
handset extension number.
7. Press OK. Save is displayed. Press Yes.
To change the PIN Code:
1. From Idle mode, press the OK key, choose Settings, and then press the OK key.
2. Choose VoIP settings and press the OK key. When prompted for a PIN code, enter the
PIN code (default 0000), and then press the OK key.
3. Choose Change PIN code and press the OK key.
4. Enter a new 4-digit PIN code.
5. Press the OK key. Save appears in the display.
6. Press Yes to save the PIN code.
7. For future reference, record the new PIN code.