Filter
Top Products
Network Configuration Notes
Mitel
®
5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Page 19
Network Configuration Notes
This section provides network configuration details.
IP Configuration
You can configure the 5610 Cordless Handset to obtain its IP address via DHCP or to use a
static IP address. The IP settings can be changed from the handset menu: Settings – Internet
settings, or from the web server IP Settings page.
Configuration file example:
%NETWORK_WAN_SETTINGS_IP%:0x00000000
%NETWORK_WAN_SETTINGS_SUBNET_MASK%:0xFFFF0000
%NETWORK_WAN_SETTINGS_GATEWAY%:0x00000000
%NETWORK_WAN_SETTINGS_DNS1%:0x00000000
%NETWORK_WAN_SETTINGS_DNS2%:0x00000000
%NETWORK_WAN_SETTINGS_DHCP%:1
File Transfer Protocol
A configuration file and firmware files can be downloaded from TFTP or HTTP servers. The
protocol used to perform file transfer can be changed from the local web interface or via
configuration file (Management Transfer Protocol field on the Management Settings sub page).
Name Values Description
NETWORK_WAN_SETTINGS_IP 0.0.0.0 (default) IP address – static IP mode
NETWORK_WAN_SETTINGS_SUBNET_MA
SK
255.255.0.0
(default)
Subnet mask – static IP mode
NETWORK_WAN_SETTINGS_GATEWAY 0.0.0.0 (default) Default gateway – static IP mode
NETWORK_WAN_SETTINGS_DNS1 0.0.0.0 (default) Primary DNS – static IP mode
NETWORK_WAN_SETTINGS_DNS1 0.0.0.0 (default) Secondary DNS – static IP mode
NETWORK_WAN_SETTINGS_DHCP 1 (default) IP mode, dynamic=1, static = 0
Name Values Description
MANAGEMENT_TRANSFER_PROTOCOL 0: TFTP
1: HTTP (Default)
Selects which protocol to use for
firmware download and configuration file
download.