Filter
Top Products
5610 Cordless Handset Feature Set
Mitel
®
5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010 Page 5
5610 Cordless Handset Feature Set
This section lists the features available for the 5610 Cordless Handset and IP DECT Stand
product.
• Call and telephony features
o Up to eight cordless handsets per stand
o Maximum of three simultaneous calls per stand
o Call forward all, on busy, or on no answer
o Call timer
o Call transfer and call hold
o Caller ID with name from phone book
o Distinctive ringing
o Call log of incoming/outgoing/missed calls
o Call return (from call log)
o Contact directory (maximum of 170 entries per stand)
o Speed dial
o Conferencing (three-party handset conference)
o Call hang up – upon return to charging cradle
o DTMF sending in call (RFC2833)
• Audio features
o Mute (disable microphone)
o Receiver volume control
o Ring tones melodies
o Ringer volume
o Key sounds (click, DTMF and special tones)
o Low battery and out-of-range audible warnings
o Speakerphone
o Headphone jack (2.5 mm)
• Deployment
o Configuration through local web interface, handset user interface, or via a
configuration file using TFTP from a network server
• Other features
o Graphical menu system
o Auto answer (when handset is lifted from charger)
o Separate charging cradle for handset
o Hearing-aid compatible
o Key lock option
o Selectable menu language
o On-hook dialing (pre-dial numbers before pressing off-hook button)
o Operating time of eight hours talk and 240 hours standby
o Automatic or fixed registration of handset to stand
o Displayed information in idle mode (signal, battery level, time)
o Message waiting indicator (missed calls, voice mail)
o 128 x 128 bit display with 65536 colors and backlight