Filter
Top Products
Navigate the Menu
71
Call a PTT Group
When calling a PTT group, the members in the defined PTT group will receive a PTT invitation
as an incoming call (PTT Voice Style).
1. Press "Menu".
2. Select "Calls".
3. Select "PTT groups"
1
.
4. Select a PTT group.
5. Press "Call", or the Off-hook key.
Short Cuts Menu
Predefined functions can be set as short cuts for the soft keys, hot keys, navigation keys, and
the Multifunction button. For example, you can to define a soft key to make a call, as a short
cut for sending a message, or as a short cut to a menu.
1. Enter the menu by pressing the “Menu” soft key, or the confirmation button on the Navigation
key.
2. Select in the menu, and press the confirmation button or the "Select" soft key.
Define a Soft Key
1. Select "Soft keys".
2. Select "Left", "Middle", or "Right".
3. Press "Select" to enter a name for the Soft key.
4. Press "OK".
5. Select "Function".
6. Press "Select" to select function for the soft key.
7. Select function from list.
8. Press "Back".
9. Select "Value" (applies only to some functions).
10. Press "Select".
11. Enter a value (for example, enter a handset number).
12. Press "Back".
13. Select "Control question".
14. Press "Select".
Note: PTT group(s) must be defined in the PDM and Messaging Group(s) in WSM to
be able to use this function. See the Mitel 5604 Wireless Handset Configuration Guide,
and the WSM Installation and Operation Guide.
1. Only available if a PTT group is defined in the PDM/WSM.