Filter
Top Products
Alarm Operation
53
• A precise location given by the DECT location devices (see the Mitel 5604 Wireless Handset
Configuration Guide).
Alarm with Data
You must manually define and store the data. To use the function, one soft/hot key/Navigation
key in the handset must be defined as a shortcut to the menu “Edit alarm data". See “Short
Cuts Menu” on page 71. The stored data is added to all types of alarm at transmission.
Automatic Call after Alarm
You can configure a handset to call a pre-defined number after an alarm has been sent.
Depending on the settings, the call can be established in the following modes;
• loud-speaking mode, or
• Monitor mode, or
• Normal mode.
See the Mitel 5604 Wireless Handset Configuration Guide for more information.