Filter
Top Products
Mitel 5604 Wireless Handset User Guide
66
Mute Handset While Charging
When you place the handset in the charger it can be muted while it is charging. When it is
removed from the charger it will switch on the sound again.
1. Select “In charger”.
2. Select “Sound off”.
Loudspeaking (Handsfree) While Charging
1. Select “In charger”.
2. Select "Loudspeaking".
Log Off Handset While Charging
When you place the handset in the charger it can be logged off while it is charging. Call list and
message list will be deleted when the handset is logged out. When it is removed from the
charger you need to log on again.
1. Select “In charger”.
2. Select “Logout”.
Change Profile While Charging
When you place the handset in the charger it can change profile while it is charging. By default,
the "Normal" profile will be activated. It is possible to change to another profile if configured.
See “Profiles Menu” on page 77
1. Select "In charger".
2. Select "Change profile".
3. if required, select "Edit" to change the profile to be activated when the handset is placed
in a charger.
Messages Absence While Charging
When you place the handset in the charger message absence can be enabled while it is
charging. See also “Redirect Calls While Charging” on page 65. The function is automatically
cancelled when the handset is removed from the charger.
When an application/system sends a message to a handset it will receive an indication that the
handset is absent. If a handset is absent the application/system determines if the message will
be sent to the handset or not, or redirected to another handset.
Note: This feature is license dependent and applicable in IP-DECT systems only.
Note: This feature requires that the parameter "Phone mode" is configured. See the
Mitel 5604 Wireless Handset Configuration Guide.
Note: If a message is sent from a handset it will not receive an indication that the recipient
is absent.