Filter
Top Products
Mitel 5604 Wireless Handset User Guide
50
Procedure Call
When configuring the functions Call services, In Call menu, Contacts, or a shortcut/service to
the Phone call function, the data added in these functions is static. When entering the data for
the function to be used, it is possible to add a variable/character U that allows the user to enter
additional numerical characters before calling the number/sending the data to a system.
See the following example for more information.
Example of configuration:
A user wants to create a service with the Phone call function. The PBX requires that a prefix
must be added to a phone number. In this case, the user can pre-program the prefix and then
enter the applicable phone number when using the Phone call function.
1. Press "Menu", or the confirmation button.
2. Select "Services".
3. Select "Add new".
4. In the Name field, enter "Call no.".
5. Select the function "Phone call".
6. In the Number field, enter the prefix to be used followed by the character "U". In this case,
the text string is as follows *21*U. The character U represents an Enter number dialog
where the user can enter the phone number.
7. Press "Save".
When using the function, an Enter number dialog appears. If the user enters "123" (or selects
a contact with this number by pressing ) and presses "OK", the number *21*123 will be
dialed. Note that no call is established before the user presses "OK", that is, post-dial.