Filter
Top Products
Menu Tree
61
In Call
You access the In Call menu during a call by pressing the "More" soft key.
If the handset is configured via PDM/WSM, you can access a particular function in the In call
menu directly by pressing the right soft key.
The In call function can be used in combination with the Procedure call function, see “Procedure
Call” on page 50. See “Call Handling for the Mitel 5000 CP” on page 32 for an illustration of the
In Call menu.
* Visible if enabled/defined in the PDM/WSM
** Visible if the Admin menu is activated. You require the DECT location license.
Additional In Call Functions
In addition to the default In Call functions, you can define 10 system specific codes for general
purposes. See the 5603/5604/5607 Programmer and Installation and Maintenance Guide.
Note: If the handset is configured via PDM/WSM, you can call a pre-defined emergency
number while the handset is locked or the keypad is locked. If calling from a locked
handset, you can only access the Microphone on/off function in the In Call menu.
However, you can access the entire In Call menu when calling from a handset with a
locked keypad.
Microphone on/off
Contacts
Messaging --->
New Call --->
Hold/Retreive
Release
Call Swap
Join
Call Back
Answer Call Waiting
Call Park
DTMF
DECT Info
Location Info --->
General purpose name 1
|
General purpose name 10
Call
[Phonebook]
Cancel
DECT Location info
Inbox
Write new message
Unsent
Sent