Filter
Top Products
Navigate the Menu
63
• The IP-DECT system is configured for Easy Registration; see the Mitel IP-DECT Base
Station Installation and Operation Guide.
• The handset’s extension number and IPEI are registered in the IP-DECT system, see the
corresponding manual for the IP-DECT system.
• The handset is not subscribed to any systems.
• The handset software is version 4.0.x or greater.
1. If needed, switch off the handset by pressing .
2. Switch on the handset by pressing .
3. Select language to be used or press "Cancel". If Cancel is pressed, the default language
(English) will be used.
4. The handset starts to search for IP-DECT systems and will subscribe to the system when
it is found.
Notes about Subscribing Handsets and Hot Desking
If the handset is subscribed, but not registered with MiVoice Business or 5000 CP, the handset
will display the following message: "Please login".
• When subscribing the handset to the IP-DECT Base Station, enter the leading 0’s of the
PARK code. Removing the 0’s will prevent subscription.
• After registering the handset with MiVoice Business or the 5000 CP using the System ID,
Extension, and auth password, the "Please Login" message is removed from the handset.
• If you are unable to subscribe the handset, ask the administrator to remove the handset
IPED from the user in the IP-DECT Base Station, if the IPED was pre-programmed for the
user.
If the handset is configured as a Hot Desk handset, then "Please Login" appears for the user
to enter hot desk information.
Subscribe to Other System
The handset can subscribe up to eight different systems. To subscribe a new system, you
require the “Park:” (Portable Access Right Key) and “Ac:” (Authentication code) related to the
system. Contact your system administrator for more information.
The IPDI code is a unique code which has been assigned to the handset. See “Admin Menu”
on page 90.
1. Enter the menu by pressing the “Menu” soft key.
2. Select in the menu.
Note: If no system is found within 2 minutes or "Cancel" is pressed, the handset’s
subscription menu is displayed. Continue with step 5 in the procedure “Subscribe to
Other System” on page 63 for more information.
Note: The PARK code may not be required if there is no alien DECT system within the
coverage area. The handset supports IP-DECT systems configured for Easy
Registration.