Filter
Top Products
Making and Answering Calls
19
Making and Answering Calls
Call List
1. Press "Menu",
2. Select "Calls" .
3. Select "Call list".
4. Select a number.
5. Press or the "Call" soft key to dial. The number can be edited before the call is dialed.
Press "More" and select "Edit number". The 25 last received, dialed or missed calls are
stored in a call list. See “Calls” on page 29.
Make a Call
Pre-Dial
Enter the number and press to get the line. The number is shown on the display while
dialing. If required, you can press the Soft key "Clear" to erase the number. You can use the
navigation key to step and add/delete a digit in the middle of a number.
An international number can be dialed from the handset by entering a + character followed by
the country code and local number. To enter the + character, long press the 0 key until the
character is shown in the display.
You can turn on the tone sender in a pre-dialed number by making a long press on the * key.
Dial Using a Pre-programmed Hot key, Soft key or Multifunction Button
The Multifunction button, hot keys, and soft keys can be programmed with a handset number.
Press the pre-programmed hot key, soft key or Multifunction button to dial the number. The call
will automatically be connected.
Note: The + character cannot be entered and international numbers cannot de dialed
in the following circumstances:
• If the 0 key has been configured as a hot key.
• If the handset has been set up to perform advanced functions normally used by a
system administrator, as described in Admin Menu on page 90.
Note: The Multifunction button does not apply to the 5604 Personal Alarm license.