Filter
Top Products
Meridian Digital Telephone IP Adapter Installation and Administration Guide 75
October 2001 Configuring the IP Adapter unit using the telephone menu
17 The telephone display asks if you want to configure the type of telephone
set attached to this Meridian Digital Telephone IP Adapter unit, similar to
the following:
Configure Set Type?
[1-Yes 2-No]
IF you want to THEN do the following:
modify the
current telephone
set type
configuration for
this Meridian
Digital Telephone
IP Adapter unit,
a. Press 1.
b. Press the Hold key.
Result: The telephone display asks what type of
telephone set is connected to the Meridian Digital
Telephone IP Adapter unit, similar to the following:
Is this a M2006?
[1-Yes 2-No]
c. If the telephone display does not show the model of
your telephone set, press 2.
d. Press the Hold key.
Note: The telephone display repeats this question
until it receives an affirmative answer with the
following set types: M2008, M2216, M2616,
M2616CT, M3310, M3820, M3902, M3903,
M3904, M3905, or OTHER. Choose OTHER if you
are using a Nortel Networks digital telephone set
with a display that is not included in the preceding
list.
e. When the telephone display shows the model of your
telephone set, press 1 and the Hold key.
Result: The telephone display asks you to confirm
your identification of your telephone set type, similar
to the following:
Are you sure?
M2616?-[1-Yes 2-No]