Filter
Top Products
102 Meridian Digital Telephone IP Adapter Installation and Administration Guide
Using the digital telephone Standard 1.1
Online Mode
This means you can place and receive calls through the
host PBX.
Port Already in Use
If this message appears on your station, your station
participates in a multi-user or dynamic pool port on the
RLC.
This message appears if the port that you are attempting to
log on to is already being used by someone else.
Port Not Logged In
If this message appears on your station, your station
participates in a multi-user or dynamic pool port on the
RLC. Your station is logged off.
Release and Try Again
There are not enough DSP resources to process the call.
Try again at a later time.
Note: Ensure to initiate calls from the appropriate calling
key according to the following parameters:
!
Use the host calling key to call someone at the host
PBX site.
Bandwidth Limit
There is not enough bandwidth to complete the requested
action.
DSP Limit
There were not enough DSP resources to complete the
requested action.
Message Description