Filter
Top Products
44 Meridian Digital Telephone IP Adapter Installation and Administration Guide
Installing the Meridian Digital Telephone IP Adapter unit Standard 1.1
3 Use both hands to push forward until the circuit card snaps into place under
the brackets.
Note: Two holes on either side of the circuit card should now be aligned
with the corresponding holes on the footstand.
4 Attach the Meridian Digital Telephone Internal IP Adapter circuit card to the
footstand with the screws supplied in the Installation Kit.
Note: Refer to “D” in the diagram on page 44.
5 Plug the male RJ-11 connector on the loose end of the Meridian Line Cord
attached to the Remote Office 9110 unit into the jack on the telephone.
6 Re-attach the footstand to the bottom of the telephone.
7 Apply the overlay identifying the power connection and the jack connecting
your Ethernet for IP network connectivity.
G101493
C
circuit card
D