Filter
Top Products
Meridian Digital Telephone IP Adapter Installation and Administration Guide 63
October 2001 Configuring the IP Adapter unit using the telephone menu
8 The telephone display asks if you want to modify the SPRE code that you
must dial to go online manually, similar to the following:
Modify Online SPRE?
[1-Yes 2-No]
IF you want to THEN do the following:
modify the
number that you
must dial to go
online with the
Meridian Digital
Telephone IP
Adapter
unit
in the
absence of an
online command
in the Online/
Offline Table,
a. Press 1.
b. Press the Hold key.
Result: The telephone display prompts you for a
new online SPRE code. The telephone display also
shows the current online SPRE code, similar to the
following:
Enter Online SPRE
#99
c. Press the digits of the new online SPRE code.
Note: All SPRE codes begin with a pound sign (#).
It is not necessary to press the # key when modifying
a SPRE code. However, when you actually use a
SPRE code, you must press the # key for the host
PBX to recognize the digits as a SPRE code.
d. Press the Hold key.
e. Proceed to step 9 on page 64.
retain the current
online SPRE code,
a. Press 2.
b. Press the Hold key.