Filter
Top Products
70 Meridian Digital Telephone IP Adapter Installation and Administration Guide
Configuring the IP Adapter unit using the telephone menu Standard 1.1
13 The telephone display asks if you want to modify RLC Parameters, similar
to the following:
Modify RLC Parameters?
[1-Yes 2-No]
not enable
prioritizing of
voice packets in
the IP header,
a. Press 2.
b. Press the Hold key.
Result: The telephone display asks if you want to
enable 802.1p mapping, similar to the following:
Enable 802.1p Mapping?
[1-Yes 2-No]
enable prioritizing
of voice packets in
the IEEE Media
Access Control
layer (802.1p),
a. Press 1.
b. Press the Hold key.
c. Proceed to step 13, below.
not enable
prioritizing of
voice packets in
the IEEE Media
Access Control
layer,
a. Press 2.
b. Press the Hold key.
IF you want to THEN do the following:
retain the current
RLC settings,
a. Press 2.
b. Press the Hold key.
c. Proceed to step 18 on page 76.
IF you want to THEN do the following: