Filter
Top Products
Meridian Digital Telephone IP Adapter Installation and Administration Guide 13
October 2001 Meridian Digital Telephone IP Adapter description
Outgoing call process
To place outgoing calls, users can either pick up the handset on the telephone or
press the line key. For a detailed description of the outgoing call process, refer to
the sample illustrations beginning on page 14.
Incoming call process
When someone places a call through the host PBX to a Meridian Digital
Telephone IP Adapter unit, the RLC connects to the remote unit. The host PBX
then completes the call normally. If the RLC cannot establish a connection, the
call rings until the host PBX forwards the call to voice mail. Refer to Chapter 6,
“Using the digital telephone”, for a more detailed description of the incoming
call process.
Host-controlled call mode
When you place a call to someone at the host site, or when someone from the
host site calls you, the call is in host-controlled call mode. Calls in host-
controlled mode are routed through the host PBX. Refer to the sample
illustrations beginning on page 14.