Filter
Top Products
82 Meridian Digital Telephone IP Adapter Installation and Administration Guide
Changing configuration settings using Configuration Manager Standard 1.1
Before you begin
This section describes the configuration settings that apply to Meridian Digital
Telephone IP Adapter units. If you need remote serial access to Configuration
Manager, use a remote management software application.
Note: Nortel Networks recommends that you use the telephone menu set to
perform the initial configuration for the Meridian Digital Telephone IP Adapter
unit. Refer to Chapter 4, “Configuring the IP Adapter unit using the telephone
menu.” Once configured, you can then use the Configuration Manager for
changes, administration, and firmware upgrades. For a more detailed description
of Configuration Manager, refer to the Reach Line Card Installation and
Administration Guide (NTP 555-8421-210).