Filter
Top Products
Meridian Digital Telephone IP Adapter Installation and Administration Guide 79
October 2001 Configuring the IP Adapter unit using the telephone menu
confirm your
instruction to
restart the
Meridian Digital
Telephone IP
Adapter
unit,
a. Press 1 to restart the Meridian Digital Telephone IP
Adapter unit.
b. Press the Hold key.
Result: The telephone display informs you that it is
restarting the system, similar to the following:
Restarting the System
Please Wait...
c. When the system restarts, the telephone display
returns to its normal state, showing the time and
date, similar to the following:
JAN 01 12:13 P
d. If the telephone is connected to a PBX, it is ready to
send and receive telephone calls as normal.
e. If the telephone is not connected to a PBX, the
telephone display shows a message similar to the
following:
HOSTLESS MODE
shut down the
Meridian Digital
Telephone IP
Adapter
unit,
thereby disabling
all functionality
on the unit,
a. Press 0.
b. Press the Hold key.
Result: The telephone display asks you to confirm
your instruction to shut down the Meridian Digital
Telephone IP Adapter unit, similar to the following:
Confirm?
[1-Yes 2-No]
Note: Only choose the shut down option when you
have physical access to the remote unit. You must be
able to disconnect then reconnect power to the
Meridian Digital Telephone IP Adapter unit to be able
to access the unit again.
IF you want to THEN do the following: