Filter
Top Products
Meridian Digital Telephone IP Adapter Installation and Administration Guide 147
October 2001 Administration
Restarting the system
After a firmware upgrade or a configuration change, it is often necessary to
restart the Meridian Digital Telephone IP Adapter unit. Use the following
procedure to restart the unit using Configuration Manager.
Note: After you restart the system, wait 7–10 seconds before placing a call.
Getting there
911x
➝
Configuration Manager
To restart the unit
1 From the Menu Bar, choose Connect
➝
System Reset
➝
Restart.
Result: The System Restart dialog box displays, similar to the following:
2 Click the Yes button.
Result: The Restarting the System. Please Wait.....progress bar displays
indicating that Configuration Manager is restarting the system, similar to the
following:
3 When the restart is complete, the system logs off the user.
Result: The Configuration Manager dialog box displays notifying you of the
successful restart, similar to the following:
4 Configuration Manager then displays the User Authentication dialog box,
so that you can resume Configuration Manager activities.