Filter
Top Products
160 Meridian Digital Telephone IP Adapter Installation and Administration Guide
Troubleshooting Standard 1.1
10060 TELNET CONNECTION
FAILED
appears when
attempting to connect to the
Meridian Digital Telephone IP
Adapter unit.
The Meridian Digital Telephone IP Adapter
unit cannot be reached on the IP network.
1 Check the configuration of network
devices and ensure that Meridian Digital
Telephone IP Adapter unit can be
reached.
2 Verify that the Ethernet cable is
connected at both ends (Meridian
Digital Telephone IP Adapter unit and
Internet Access Device).
3 Check the Ethernet cable and ensure it
is good.
4 Ensure the Meridian Digital Telephone
IP Adapter unit is powered up.
5 Power the Meridian Digital Telephone IP
Adapter unit off, then back on.
6 PING the Meridian Digital Telephone IP
Adapter unit.
7 Contact your Nortel Networks
distributor. There may be a hardware
problem.
Symptom What to do