Filter
Top Products
Meridian Digital Telephone IP Adapter Installation and Administration Guide 85
October 2001 Changing configuration settings using Configuration Manager
Meridian Digital Telephone IP Adapter System Configuration field
descriptions
Field Description
Unit ID
Assign a number between 1 and 20 to the Meridian Digital
Telephone IP Adapter unit that you are configuring. This
number:
!
must be different from numbers assigned to other units
connected to the same RLC
!
must be consistent with the configuration on the RLC
for this unit ID
Node Name
Enter your site name. The node name identifies this
Meridian Digital Telephone IP Adapter unit in the remote
network.
DSP Gain
Select the number of decibels (dB) that you want to add to,
or subtract from, the strength of the incoming signal before
the DSP processes it. Valid options are: 9, 6, 3, 0, -3, -6, -9,
-12, and -15.
Note: Change this setting at the remote site to address a
problem with signal strength at the host site.
Time Offset
Click on the up or down arrows to change the time zone
difference from the host PBX.
Note: The time can be changed in 15-minute intervals
only.
Emergency Activation
Code
This setting does not apply to Meridian Digital Telephone
IP Adapters.