Filter
Top Products
Meridian Digital Telephone IP Adapter Installation and Administration Guide 67
October 2001 Configuring the IP Adapter unit using the telephone menu
12 The telephone display asks if you want to modify the IP parameters, similar
to the following:
Modify IP Parameters?
[1-Yes 2-No]
IF you want to THEN do the following:
retain the current
IP parameters
configured for this
Meridian Digital
Telephone IP
Adapter
unit,
a. Press 2.
b. Press the Hold key.
c. Proceed to step 13 on page 70.
modify the IP
parameters
configured for this
Meridian Digital
Telephone IP
Adapter
unit,
a. Press 1.
b. Press the Hold key.
Result: The telephone display asks if you want to
enable Dynamic Host Configuration Protocol
(DHCP), similar to the following:
Enable DHCP?
[1-Yes 2-No]
allow a DHCP
server to
dynamically
assign an IP
address to this
Meridian Digital
Telephone IP
Adapter
unit each
time someone logs
on with this unit,
a. Press 1.
b. Press the Hold key.
c. Proceed to Enable DiffServ? [1-Yes 2-No] on page
69.
Note: Refer to the Reach Line Card Installation and
Administration Guide (NTP 555-8421-210) for more
information on DiffServ Codepoint and 802.1p
mapping.