Filter
Top Products
58 Meridian Digital Telephone IP Adapter Installation and Administration Guide
Configuring the IP Adapter unit using the telephone menu Standard 1.1
IF you want to THEN do the following:
display read-only
IP parameters,
a. Press 1.
b. Press the Hold key.
Result: The telephone display shows the remote
site’s current IP address, similar to the following:
IP Address
192.168.142.102
c. Press the Hold key.
Result: The telephone display shows the remote
site’s current IP subnet mask, similar to the
following:
IP Subnet Mask
255.255.255.0
d. Press the Hold key.
Result: The telephone display shows the remote
site’s current IP gateway, similar to the following:
IP Gateway
192.168.142.254
e. Press the Hold key.
f. Proceed to step 4 on page 59.
not display IP
parameters,
a. Press 2.
b. Press the Hold key.