Filter
Top Products
Meridian Digital Telephone IP Adapter Installation and Administration Guide 41
October 2001 Installing the Meridian Digital Telephone IP Adapter unit
Required hardware and software tools
The following is a list of required hardware and software installation tools:
!
an antistatic ESD wrist strap (recommended)
!
a Phillips-head screwdriver and two number eight wood screws (if you
want to mount the Meridian Digital Telephone External IP Adapter unit on
the wall)
!
the Configuration Manager software installed on the administration PC (to
make configuration changes or administer the Meridian Digital Telephone
IP Adapter unit). You can download the software by clicking on the
Customer Support and Software Distribution links at the following website:
www.nortelnetworks.com
!
a TFTP server application installed on the PC (required for performing
firmware upgrades)
If you do not have a TFTP server currently installed on the administration
PC, you can obtain one from the Internet.
Unpacking and inspecting the equipment
Before you install the Meridian Digital Telephone IP Adapter unit, ensure that
the following package contents are all present and are not damaged:
!
one Meridian Digital Telephone Internal IP Adapter or Meridian Digital
Telephone External IP Adapter
!
one power cord and power supply for each Meridian Digital Telephone IP
Adapter unit
!
one six-foot RJ-11 telephone cable for each Meridian Digital Telephone
External IP Adapter unit
!
one installation kit for each Meridian Digital Telephone Internal IP Adapter
circuit card. Each installation kit includes the following:
— two ferrite beads
—one overlay
— two mounting screws (used to attach the circuit card to the foot stand)
!
the Remote Office and RLC Release Notes (NTP 555-8421-102)
!
the Meridian Digital Telephone IP Adapter Quick Start Guide