Filter
Top Products
UNIT OPERATION > WAYPOINTS
Rino
®
520/530 Owner’s Manual 49
Creating Waypoints
To create a waypoint for a
map feature contained in
the Find feature:
1.
Access the Find Menu from
the Main Menu and open a
categories list to select the
desired map item.
2. Press In and release the
Thumb Stick to display the map item information
page.
3. Highlight the Save button and press the Thumb
Stick In to save the item as a waypoint.
To create a waypoint using the map panning
arrow:
1. With the Pan Map feature active (refer to the Map
Page section of this manual), move the panning
arrow (map pointer) on the map to the location
or map item you want to mark, then press the
Thumb Stick In to display a prompt for a location
or information page for a map item
2. A prompt asks you if you want to save the location
as a Waypoint. Press Yes and the Waypoint Page
displays, automatically assigning a number to the
waypoint. Highlight the Close button and press
the Thumb Stick In to exit the page.
To create a waypoint by entering coordinates:
1. Press In and hold the Thumb Stick to access the
Mark Waypoint page. You can also use the Find
Menu to display a previously saved waypoint.
2. Highlight the Location field and press in on the
Thumb Stick to open the on-screen keyboard.
Use the keyboard to change the location
coordinates and press the OK button to exit.
3. You may also change the waypoint name, symbol,
or add notes using the same process.
Saving a map feature
as a waypoint