Filter
Top Products
64 Rino
®
520/530 Owner’s Manual
UNIT OPERATION > TRACKS PAGE
Tracks Page
The Rino 520/530 draws an electronic bread crumb trail
on the Map Page as you travel along. This bread crumb
trail is the Track Log. The Track Log contains information
about points along its path, including time, and position.
The Rino 520/530 uses this information to allow you to
navigate using the saved track. You may also save tracks
from other Rino users as they communicate with you.
To open the Tracks page:
1. Access the Menu Page by using the on-screen
menu button or the Page button.
2. Select the Tracks icon and press the Thumb
Stick In. The Tracks page opens.
To save and use a Track:
1. Access the Tracks page from the Main Menu.
Press the on-screen Off button In to pause track
logging. When track logging is active the On
button is filled by a dot.
2. Highlight the
Save on-screen button and then
press the Thumb Stick In to display the track log
“Do you want to save the entire track?” prompt.
3. If you choose Yes the entire track is saved.
4. If you choose No, the track is displayed on the
map along with a panning arrow. You are asked
to select a beginning point for the part of the track
you want to save. Move the panning arrow to the
desired point and then press the Thumb Stick In.
4. The prompt then asks you to select the ending
point for the saved track. Move the panning arrow
to the desired point. Press the Thumb Stick In to
save the track log and display the Track Page. The
Track Page shows the track name (which can be
renamed using the keyboard for data entry), the
total distance of the track, track area (if available),
a Show on Map option, and on-screen buttons for
Delete, Map, OK, and TracBack.