Filter
Top Products
When the track log memory field reaches 100%, the most
recent track points start to overwrite the least recent if the
default setting Wrap When Full remains selected on the
track log setup. To avoid losing track points you want,
save the Track Log when it approaches the 99% mark.
The active track log stores up to 10,000 points.
The Saved Track Page displays the track and it can also
be displayed on the Main Map Page as you navigate. You
may save up to 20 tracks with 500 points per track in the
unit. Saved Contact tracks count towards this total. Tracks
are marked BEGIN and END.
To use the TracBack feature:
1. Highlight the TracBack button on the Tracks
Page and press the Thumb Stick In. The track
is displayed on the map and you are prompted to
“Select the point you want to TracBack to.”
2. Use the panning arrow to select the desired point
and press the Thumb Stick In to enable.
3. Use the Map Page or the Compass Page to
navigate the Track.
Track on Map
TracBack
66 Rino
®
520/530 Owner’s Manual
UNIT OPERATION > TRACKS PAGE