Garmin 520 Two-Way Radio User Manual


 
86 Rino
®
520/530 Owner’s Manual
UNIT OPERATION > SETUP PAGES
RTCM In/Text Out—Allows DGPS input using a
standard RTCM SC-104 format and simple ASCII text
output of location and velocity information.
None—Provides no interfacing capabilities.
If Garmin DGPS or RTCM In/NMEA Out format
is selected, additional fields are provided to control a
Garmin differential beacon receiver directly from your
unit. Tuning is automatic with Scan or you can enter the
beacon frequency and bit rate when you select User from
the Beacon list to manually tune the receiver. Refer to the
beacon receiver instructions.
To select a serial data format:
1. Highlight the Serial Data Format field and then
press the Thumb Stick In.
2. Highlight an option and then press the Thumb
Stick In to activate it.
Beacon Receiver
Setup Page