Filter
Top Products
UNIT OPERATION > ROUTES PAGE
Rino
®
520/530 Owner’s Manual 69
To add a Find Menu item to a route:
1. Select an item from the Find Menu and display
its Information Page. If a contact is used in a
route, the route changes as the contact’s position
is updated, or it may be saved as a Waypoint to
serve as a stationary point.
2. Select the page Option Menu and select Add To
Route to display the Routes List.
3. Highlight and select the route desired and then
press the Thumb Stick In. A “Waypoint Added
Successfully” message displays.
Editing a Route
To remove all waypoints:
1. From the Route Page, select the on-screen
Option Menu button and press the Thumb Stick
In to access the Option Menu.
2. Highlight the Remove All option and then press
the Thumb Stick In to remove all waypoints from
the list. When you see the prompt “Do you really
want to remove all waypoints from the route?”,
select Yes.
To reverse the route:
1. From the Route Page, select the on-screen page
Option Menu button and press the Thumb Stick
In to access the Option Menu.
2. Highlight the Reverse Route option and then
press the Thumb Stick In to reverse the order of
waypoints in the list. You can now navigate back
to your original location. To change the route back
to the original order, repeat this process.
Route Options