Filter
Top Products
82 Rino
®
520/530 Owner’s Manual
UNIT OPERATION > SETUP PAGES
For more information on Loran TDs, you may download
Garmin’s Loran TD Position Format Handbook from
the Garmin web site at http://www.garmin.com/support/
userManual.jsp.
Map Datum—Offers a selection of nearly all map
datums in common use. Every map is based on a map
datum (a reference model of the earth’s shape) and is
usually listed in the title block of the map. If you are
comparing GPS coordinates to a paper map, chart, or
other reference, the map datum in this field must match
the horizontal map datum used to generate the map or
other reference. The default datum is WGS-84 (World
Geodetic Survey 1984) and should only be changed when
using maps or charts specifying a different datum. If a
map does specify a datum, use the options list to Find
datums applicable to the region of the map, selecting the
one that provides the best positioning at a known point.
If necessary, you also may choose the
User datum for
custom designed grids.
NOTE: The User datum is based on a WGS-84-Lo-
cal datum and is an advanced feature for unlisted
or custom datums. To learn more, check your local
library or the Internet for educational materials on
datums and coordinate systems.
Distance/Speed—Choose from five units of measure to
display your rate of travel.
Elevation/Vertical Speed
—Choose from three units of
measure to record your elevation and vertical speed.
Pressure
—Choose from inches, millibars, or
hectopascals to measure the pressure.
Temperature
—Choose from Celsius or Fahrenheit.
Depth—Choose from Feet, Fathoms, or Meters.