Filter
Top Products
UNIT OPERATION > RADIO PAGE
Rino
®
520/530 Owner’s Manual 13
To set up a Scanlist:
1. Using the Thumb Stick, highlight the Option Menu
button and press In. Highlight Setup Scanlist and
press the Thumb Stick In.
2. To add/remove a channel from the list, highlight
the channel and press the Thumb Stick In to
add/remove the check mark in front of the name.
Only channels that are checked will be scanned.
3. To select all channels or clear all channels,
highlight either the Select All or Clear All buttons
and press the Thumb Stick In.
4. To Scan Current Codes, highlight the
Option
Menu and press the Thumb Stick In. Choose the
desired setting and press the Thumb Stick In.
Radio Page Option Menu
The Radio Page Option Menu allows you to customize
aspects of your Rino 520/530, such as setting up the
radio, programming call and ring tones, and setting up a
scanlist.
The Code field is blank when the unit is scanning or monitoring
channels until a signal is received and it pauses.
Scanlist Page
Radio Page Option Menu
Rino 530 option only