Filter
Top Products
Compass Page Options
Sight ‘N Go—Use the Sight ‘N Go feature to locate a
landmark visually and then lock in a magnetic heading
to it. Rino 530 feature only.
Stop Navigation/Resume Navigation—Cancels/resumes
navigation (“Grayed out” or disabled unless you are
navigating on a Go To, Track, or Route.)
Recalculate—Recalculates the active route.
Bearing Pointer/Course Pointer—Toggles between
Bearing (always directed toward your destination) and
Course (shows amount of correction needed to get back
on course.)
Show Data Fields—Toggles to display data fields on the
right side of the display or removing the data fields
Calibrate Compass—Calibrates the electronic compass.
Follow the on-screen instructions. Rino 530 feature only.
Restore
Defaults—Returns options and data field choices
to factory designations.
To change data fields:
1. Use the Thumb Stick to highlight the desired data
field and then press it In to display the list of data
options.
2. Select the desired option from the list and press
the Thumb Stick In. The list of data field choices
and definitions may be found in the Appendix.
34 Rino
®
520/530 Owner’s Manual
UNIT OPERATION > COMPASS PAGE
Compass Page Option Menu