Filter
Top Products
Using Sight ‘N Go
Available for the Rino 530 only, this feature allows you
visually locate an object and navigate to it.
To use Sight ‘N Go to navigate:
1. Use the Page button to access the Compass
Page and then use the Thumb Stick to access
the Option Menu.
2. Use the Thumb Stick to highlight Sight ‘N Go
and press In. Note that the compass ring with
pointer is in-line with the two sighting marks on
the case.
3. Hold the Rino 530 at eye level and line up the two
sighting marks on the case with a distant object.
Press the Thumb Stick In to Lock Direction.
4. To navigate to your destination, select Set Course
and press the Thumb Stick In. Begin traveling to
your destination using the pointer as a guide.
To view your destination as a waypoint, select
Project Waypoint and press the Thumb Stick In.
To re-sight the destination, press the Thumb Stick
In when Re-Sight is highlighted.
Calibrating the Compass
When you first use the Rino 530, the Electronic Compass
must be calibrated outdoors and away from metal
objects. The accuracy of the Electronic Compass is
adversely affected if the unit is not held level or is held
near items that generate magnetic fields, such as cars,
large belt buckles, etc. Recalibration is recommended
after significant environmental changes such as location
changes, temperature fluctuations, switching from
lithium-ion battery power to alkaline or NiCad. etc.
Rino 530 held level
for Sight ‘N Go
Sighting Marks
UNIT OPERATION > COMPASS PAGE
Rino
®
520/530 Owner’s Manual 35