Filter
Top Products
UNIT OPERATION > MAP PAGE
Rino
®
520/530 Owner’s Manual 27
Using the Pan Map Option
The Map Page pan function allows you to display an
arrow used to point at and identify items on the map,
and to move the map in order to view areas beyond the
current viewing area on the display.
The map panning function is activated from the Option
Menu on the Map Page. Use the Thumb Stick to move
the panning arrow (also referred to as the map pointer) in
the desired direction. If the arrow moves to the edge of
the map display, the map also moves to reveal more area.
Whenever you place the panning arrow on a map item,
the name of that item is highlighted. This feature applies
to waypoints, roads, lakes, rivers; nearly everything that
is displayed.
Press the Thumb Stick In to mark the arrow location or
display the map item information page. The Option Menu
allows you to: send the location of that item, project a
waypoint from it, save it as a waypoint, set a proximity
circle around it, add it to a route, or view the Sun &
Moon phase or view Hunt & Fish information from it.
On-screen buttons at the bottom of the page allow you
to Go To the map item, display it on the map or to select
OK and return to the Map Page. Press the Page/Quit
button to stop panning the map.
To Find an item near the map pointer:
1. When using the panning arrow, press and hold the
Thumb Stick In to display the Shortcuts Menu.
2. Select Find to display items. Select the category
you wish to search (waypoints, contacts, etc.). The
Rino 520/530 then searches for the items nearest
the location of the map pointer instead of your
actual location.
Map Page with
Panning Arrow