Filter
Top Products
Effective December, 1998
IL 33-K2C-1
Page 3
Before Beginning the Retrofit Process
Identify the Breaker and the Retrofit Kit
It is important to verify exactly which version of ITE
K-Line Breaker(s) is to be Retrofitted and to insure
that the correct Cutler-Hammer Retrofit Kit(s) was
ordered. Each Breaker must be identified using
all of the following sources:
1. Name Plate Information;
2. Back Plate Color;
3. Type of Finger Clusters
(Rectangular or Round);
4. Fuse Use and Configuration
(Horizontal or Vertical).
Please refer to the following chart and verify
that the first three (3) characters of the Retrofit
Kit Code Number correspond to the Breaker
being Retrofitted.
Follow the Icons to a Successful Retrofit
During certain parts of the Retrofit Process,
procedures may differ depending on the version
of the Breaker being Retrofitted. To enable the
Retrofitter to quickly identify the correct procedures
for the Breaker, Icon(s) will appear. Simply follow
only the instructions identified by the Icon for the
Breaker being Retrofitted.
Breaker Back Plate Desired Sensor Finger Cluster Fuse Fuse Retrofit
Rating Color
1
Location Type Location Configuration Kit Code ICON
Non-Fused
K-1600 Black Top Rectangular None N.A. K1C
K-1600 Red Top Rectangular None N.A. K2C
K-2000 Red Top Round None N.A. K2D
Top Mounted Horizontal and Vertical Fused
KDON- Black
2
Bottom Rectangular Top Horizontal K6C
1600 or Vertical
KDON- Red Bottom Rectangular Top Horizontal K4C
1600 or Vertical
KDON- Red Bottom Round Top Horizontal K7C
1600 or Vertical
Bottom Mounted Horizontal Fused
KDON- Black
2
Top Rectangular Bottom Horizontal K1C
1600
KDON- Red Top Rectangular Bottom Horizontal K2C
1600
KDON- Red Top Round Bottom Horizontal K5C
1600
NOTES:
1. Black or Red refers to the color of the Breaker Back Plate.
2. If specified during ordering, special Trip Unit Brackets have been supplied for some older models of the
KDON-1600 Black Breaker equipped with trigger fuses. If the Brackets are needed but were not ordered,
contact Cutler-Hammer at: 1-800-937-5487.