8.24 Using The Caller ID Feature
The number of the calling party will be displayed if your telephone has
been assigned Caller ID service and you have one of the following:
• Lines that ring audibly at your station.
• Lines that ring audibly at another station that you answer with call
pickup.
• Lines that are transferred to your station.
Incoming call numbers are displayed in the upper half of the LCD. If
caller’s name is available, it is displayed in the lower half of the LCD.
If another call rings in while on a incoming call, the second caller’s
number flashes on the LCD for five seconds.
The system stores the last caller’s number. Pressing the HOLD and
then SAVED NUMBER REDIAL button causes the system to call
back the last caller.
NOTE: If your system installer has not programmed a SAVED
NUMBER REDIAL button, refer to section 10.4, Storing The
Feature Buttons, for instructions on programming this button.
Using The Other Telephone Features GCA70–245
8–24 LCD Speakerphone Reference Manual