4.8 Camping At Another Telephone
And Waiting For An Automatic Callback
If the telephone you have called on the intercom line is busy or rings
with no answer, you can have the system ring your telephone when the
called station becomes idle (if it was busy) or when there is any activity
initiated at that telephone (if it rang with no answer before).
• To camp on at a busy or no answer station,
1. Make intercom call.
2. Press CAMP.
3. Your telephone immediately hangs up. When the telephone you
called becomes idle, your telephone will ring with five short ring
bursts. When you hear the ring bursts, press INTERCOM.The
other telephone will start ringing.
If you do not press INTERCOM within the time limit, the
callback is canceled at that time; however, you can cancel
automatic callback at any time before your telephone sounds the
ring bursts.
• To cancel automatic ringback,
1. Press INTERCOM and dial #6.
NOTE: If you make a call in the voice-announce mode and receive no
answer at the called station, press INTERCOM before pressing
camp button in order to camp on at that station.
• To camp on at a station with a Do Not Disturb condition set,
1. Make intercom call.
2. Press CAMP. A callback will occur when called station is no
longer set in the Do Not Disturb mode.
Making Calls GCA70–245
4–8 LCD Speakerphone Reference Manual