Filter
Top Products
5.4 Placing A Call In A Parking Orbit
• To place a call on hold within the system where it can be
answered at any telephone in the system (parking a call in orbit),
1. While on the call, press INTERCOM ✳.
2. Dial code for park location (orbit) (91–99 for orbit 1–9).
3. Remember the code for later use or make it known to those who
need to know in order to retrieve the call.
• To retrieve a call that was placed on hold in the system (parked),
1.
From any station, press INTERCOM
#.
2. Dial code for orbit 1–9 (91– 99).
5.5 Handling Recalled Hold Calls
After a call has been on hold for the period of time (set by the installer
of your system), the system will cause three short ring bursts to sound
at your telephone and the flash rate of the line button becomes faster.
If the call is on exclusive hold, it will revert to manual hold after the
hold recall time period. If the call is parked on hold, either at another
phone or in orbit within the system, it will also revert to manual hold
after the hold recall time period. When calls on exclusive hold or calls
parked on hold revert to manual hold, you will hear three short ring
bursts. Calls that revert to manual hold can be picked up from any
phone in your line group.
• If a line was placed on manual hold, exclusive hold, directed hold
or park orbit and that line is recalling,
1. Press HOLD to place the call on hold at your station and restart
HOLD timer
—OR—
press ANS to retrieve the call.
GCA70–245 Holding Calls
LCD Speakerphone Reference Manual 5–3