Filter
Top Products
3.3 Answering Calls At Monitored Stations
Your system may provide a station monitoring feature, which allows
you to monitor the status (idle, ringing, or busy) at other stations. If
your telephone has this feature, a BLF light will flash whenever a DSS
station is ringing. In this case, you can answer a call at a ringing DSS
station by pressing the DSS button.
• To answer a call at a monitored telephone,
1. Note flashing BLF light.
2. Press DSS button.
3. Speak toward telephone to answer call. Lift handset if privacy is
desired.
NOTE: If you place the call on hold or if you transfer it to another
telephone, the BLF light turns off. You can retrieve the call, if
necessary, by pressing TAP.
3.4 Answering Night Transferred Calls
The system attendant can take action that transfers incoming calls to a
particular station or stations for off-hour ringing (See section titled
Using Your Telephone to Transfer Calls). After the attendant has set up
this feature, you can answer an outside call when it rings anywhere in
the system.
• When you hear ringing,
1. Press INTERCOM.
2. Dial 80.
3. Speak toward telephone to answer call. Lift handset if privacy is
desired.
Answering Calls GCA70–245
3–2 LCD Speakerphone Reference Manual