Filter
Top Products
8.7 Identifying Your Telephone
With Automatic Set Relocation
If your installer has equipped your system with automatic set
relocation, you can move your telephone to another location and be
given a choice (through a display prompt) as to whether you want to
keep your previous programming or use the programming in the new
location. Respond to the prompt according to your need.
• To maintain the extension number and programming features
from the old location,
1. Connect the telephone line cord to the new jack.
2. Note the flashing HOLD light and press the HOLD button while
the light is still flashing (your telephone immediately assumes the
features from the previous location),
—OR—
do nothing until the HOLD light stops flashing (your telephone
automatically assumes the features from the previous location).
• For your telephone to assume the extension number and
programming features from the new location,
1. Connect the telephone line cord to the new jack.
2. Note the flashing HOLD light and press the # button while the
light is still flashing (your telephone immediately assumes the
features from the new location).
GCA70–245 Using The Other Telephone Features
LCD Speakerphone Reference Manual 8–7