Filter
Top Products
8.17 Switching The Dialing
Mode Between Pulse And Tone
If your local telephone service is pulse (rotary dialing), your telephone
is arranged to dial in this manner (when programmed to do so by the
installer). If you need to send tones during a dialing sequence (e.g.; to
send bank-by-phone tones, etc), you can convert to tone while dialing.
The system will switch back to pulse dialing when you end your call.
You can store a # as part of an automatic dialing number to
effect pulse-to-tone switching where needed.
• To convert to tone dialing at any time during dialing or while on
an active call,
1.
Press
#.
8.18 Using Background Music
If background music is supplied by the telephone system, you can turn
it on at your telephone speaker. Background music automatically turns
off during calls and voice announcements.
• To turn the music on,
1. Press OPTIONS.
2. Press NEXT.
3. Press MUSIC.
4. Press ON.
5. Press SPEAKER to end (the SPEAKER light turns on when
background music is on).
6. Adjust the loudness of the music with the speaker volume control.
• To turn the music off,
1. Press OPTIONS.
2. Press NEXT.
3. Press MUSIC.
4. Press OFF.
5. Press SPEAKER to end (the SPEAKER light turns off when
background music is off).
Using The Other Telephone Features GCA70–245
8–16 LCD Speakerphone Reference Manual