Filter
Top Products
10.1 Programming For Automatic
Dialing —continued—
The outside numbers and feature codes are commonly referred to as
autodial numbers when they are stored at the programmable button
locations; however, they are referred to as personal speed dial numbers
when they are stored at the 10 keypad number locations. The intercom
extension numbers are referred to as direct station selection (DSS)
numbers. Plus, the light associated with the DSS button is referred to as
the busy lamp field (BLF) light.
• Before you begin programming, write down:
1. INTERCOM or outside line you will use to access the number.
2. The telephone number, extension number, or feature code you are
storing.
As you program numbers, fill in the identification strips on your
telephone.
You can fill out the charts on the next page, if you wish, for a personal
record of your stored numbers.
NOTE: The telephone system allows only one autodial number at a
programmable button; however, you can store an autodial
number or feature code at a second level of a location where a
DSS is already stored; just repeat the programming procedure.
Programming Your Telephone GCA70–245
10–2 LCD Speakerphone Reference Manual