Filter
Top Products
8.20 Using The Optional Tracker Paging System
The optional Tracker paging system allows you to send and receive
messages on Tracker Pagers assigned to station extension numbers.
The Tracker system will also park calls in orbit for retrieval by the
paged party. The type of message that the system delivers (either
alpha/numeric or numeric-only) is dependent upon the Tracker Pager
model in use at the station.
If your station includes a Tracker Pager, you must enable it for your
use. Further, it is a good practice to disable it when you do not wish to
receive paged messages and when you leave your station at the end of
your day.
• To enable a Tracker Pager at your station,
1. Press INTERCOM.
2. Dial ✳ 06.
• To disable a Tracker Pager at your station,
1. Press INTERCOM.
2. Dial #06.
• To send a call back message to someone’s Tracker Pager after
receiving a ring—no answer,
1. Make an intercom call to someone and receive no answer.
2. Press preprogrammed TRACK button (or dial #01).
3. After your station returns to idle* hang up handset or press
SPEAKER to end. The Pager—Tracker system will transmit your
station extension number to called party’s Tracker Pager display.
(Some models will also display your station name if the system is
programmed to include station names.)
* If the Tracker paging system does not accept your actions, an error
tone will sound at your telephone.
Using The Other Telephone Features GCA70–245
8–18 LCD Speakerphone Reference Manual