Vertical Communications DSU and DSU II Telephone User Manual


 
2.10 Storing The System Speed Dial Numbers And Names
You can store up to 99 system speed dial numbers at your attendant
telephone that every system user can access from his or her telephone.
Typically, these are numbers that are frequently called by many
different users and emergency numbers that you want readily available
to everyone. Distribute a list of these stored numbers to the system
users for their reference.
To program system speed dial numbers from the attendant’s
station,
1. Press INTERCOM.
2. Dial #02.
3. Dial 01–99 to choose storage location.
4. Dial # to clear current entry.
5. Choose line that is to be used:
Dial 90 for no line assignment (system will choose last line used
at calling station or prime line if one is assigned to calling station),
—OR—
dial 01–16 for lines 1–16,
—OR—
press HOLD then dial 17–24 for lines 17–24,
—OR—
dial 91–94 for line groups 1–4,
—OR—
press INTERCOM for intercom line.
6. Dial the number to be stored (32 digits maximum),
press HOLD to store pause (if required), and
press TAP to store flash (if required).
Programming The Attendant Features GCA70–245
2–16 LCD Speakerphone Reference Manual