Vertical Communications DSU and DSU II Telephone User Manual


 
2.4 Naming The System Telephones
If you have an LCD speakerphone, this feature lets you know who is
calling you. You can assign either a personal name or a group name to
each system telephone. This name can contain up to seven letters and
will show up in the user’s display and/or in the called party’s display.
Typical names could be SRVC, MKTG 1, K SMITH.
Name the system telephones as follows:
1. Use letter code table (page 2-9) to compose names for all
telephones requiring them (the system accepts up to seven letters
per name),
2. Press INTERCOM,
3.
Dial
# 06,
4. Dial the station number of the telephone to be named (10-57),
5.
Dial
# to clear current entry,
6. Dial two-digit codes that correspond to letters in name,
7. Dial to continue entering station names (repeat above steps
beginning with station selection 10-57),
8. Press SPEAKER to end,
9. Record names on pages 2-10–2-11.
Programming The Attendant Features GCA70–245
2–8 LCD Speakerphone Reference Manual