Filter
Top Products
debug vrm inout
Voice over IP for the Cisco AS5800 71
debug vrm inout
To display debug messages for all DSP-specific messages going to and coming from the voice
resource manager (VRM), use the debug vrm inout privileged EXEC command. To stop displaying
DSP-specific messages, use the no form of this command.
[no] debug vrm inout
Syntax Description
There are no arguments or keywords used in this command.
Defaults
No default behavior or values.
Command History
Examples
The following example displays DSP-specific messages going to the VRM when a call is made:
*Jun 17 13:02:41.495:vrm_vtsp_open :vtsp_cdb_ptr 623D2170
*Jun 17 13:02:41.495:vrm_vtsp_open :VTSP_SUCCESS
*Jun 17 13:02:41.535:vrm_vtsp_get_capabilities :vtsp_cdb_ptr 623D2170
*Jun 17 13:02:41.535:vrm_vtsp_get_capabilities :vtsp_cdb_ptr 623D2170
*Jun 17 13:02:41.535:vrm_vtsp_set_codec :vtsp_cdb_ptr 623D2170 new_codec 5
*Jun 17 13:02:41.535:VTSP_SUCCESS:Codec 5 was loaded already.
*Jun 17 13:02:41.767:vrm_vtsp_set_codec :vtsp_cdb_ptr 623D2170 new_codec 5
*Jun 17 13:02:41.767:VTSP_SUCCESS:Codec 5 was loaded already.
The following example displays DSP-specific messages going to the VRM when a call is complete:
*Jun 17 13:02:49.119:vrm_vtsp_close :vtsp_cdb_ptr 623D2170
*Jun 17 13:02:49.119:vrm_vtsp_close :0x2 close OK
Related Commands
Release Modification
12.0(7)T This command was introduced.
Command Description
debug vrm control Displays debug messages for all DSP-specific control messages going to the
voice resource manager (VRM).
debug vrm error Displays debug messages for all DSP-specific error messages going to the voice
resource manager (VRM).