Filter
Top Products
Command Reference
Voice over IP for the Cisco AS5800 21
!
dial-peer voice 12345 voip
destination-pattern 12345
tech-prefix 6#
session target ras
!
! Enable gateway functionality.
gateway
!
! Enable Cisco Express Forwarding.
ip cef
!
! Configure and enable the gateway interface.
interface FastEthernet0/3/0
ip address 173.60.0.0.255.255.255.0
no ip directed-broadcast
no keepalive
full-duplex
no cdp enable
h323-gateway voip interface
h323-gateway voip id gk3.gg-dn1 ipaddr 173.30.0.0 1719
h323-gateway voip h323-id gw3@gg-dn1
h323-gateway voip tech-prefix 9#
!
! Configure the serial interface.(This configuration is for a T3 serial interface.)
interface Serial1/0/0:1:23
no ip address
no ip directed-broadcast
ip mroute-cache
isdn switch-type primary-5ess
isdn incoming-voice modem
no cdp enable
Command Reference
This section documents new or modified commands. All other commands used with this feature are
documented in one of the following Cisco IOS documentation:
• Cisco IOS Release 12.0 Voice, Video, and Home Applications Command Reference
• Cisco IOS Release 12.0 Dial Solutions Command Reference
• Cisco IOS Release 12.0(3)T Voice over IP for the AS5300 feature module
• Cisco IOS Release 12.0(3)T Service Provider Features for Voice over IP feature module
• Cisco IOS Release 12.0(7)T Configuring Interactive Voice Response for Cisco Access Platforms
feature module
New Commands
• dtmf-relay
• show vrm vdevice
• show vrm active_calls
• test vrm busyout
• test vrm reset
• test vrm unbusyout