Filter
Top Products
codec
Voice over IP for the Cisco AS5800 23
codec
To specify the voice coder rate of speech for a dial peer, use the codec dial-peer configuration
command. To restore the default voice coder rate of speech value, use the no form of this command.
codec {g711alaw | g711ulaw | g723r53 | g723r63 | g726r16 | g726r24 | g726r32 |
g728 | g729abr8 | g729ar8 | g729br8 | g729r8 | gsmfr}
no codec
Syntax Description
Defaults
g729r8.
Command Modes
Dial-peer configuration
g711alaw G.711 A-Law 64000 bits per second (bps).
g711ulaw G.711 u-Law 64000 bps.
g723r53 G.723.1 5300 bps.
g723r63 G.723.1 6300 bps.
g726r16 G.726 16000 bps.
g726r24 G.726 24000 bps.
g726r32 G.726 32000 bps.
g728 G.728 16000 bps.
g729abr8 G.729 ANNEX-A & B 8000 bps.
g729ar8 G.729 ANNEX-A 8000 bps.
g729br8 G.729 ANNEX-B 8000 bps.
g729r8 G.729 8000 bps.
gsmfr GSMFR 13200 bps.