Filter
Top Products
Command Reference
44
Cisco IOS Release 12.0(7)T
show vrm active_calls
To display active-only voice calls either for a specific VFC or all VFCs, use the
show vrm active_calls privileged EXEC command.
show vrm active_calls {dial-shelf-slot-number | all}
Syntax Description
Defaults
No default behavior or values.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
Use the show vrm active_calls to display active-only voice calls either for a specific VFC or all
VFCs. Each active call occupies a block of information describing the call. This information
provides basically the same information as the show vrm vdevice command.
Examples
The following is sample output from the show vrm active_calls command specifying dial shelf slot
number:
5800# show vrm active_calls 6
slot = 6 virtual voice dev (tag) = 61 channel id = 2
capabilities list map = 9FFF
last/current codec loaded/used = None
TDM timeslot = 241
Resource (vdev_common) status = 401 means :active others
tot ingress data = 24
tot ingress control = 1308
tot ingress data drops = 0
tot ingress control drops = 0
tot egress data = 22051
tot egress control = 1304
tot egress data drops = 0
tot egress control drops = 0
dial shelf slot number Slot number of the dial shelf. Valid number is 0 to 13.
all Lists all active calls for VFC slots.
Release Modification
12.0(7)T This command was introduced.