Filter
Top Products
Command Reference
48
Cisco IOS Release 12.0(7)T
Examples
The following is sample output from the show vrm vdevice command specifying dial shelf slot
number and DSP number. In this particular example, the call is active so the statistics displayed are
for this active call. If no calls are currently active on the device, the statistics would be for the
previous (or last active) call.
5800# show vrm vdevices 6 1
slot = 6 virtual voice dev (tag) = 1 channel id = 1
capabilities list map = 9FFF
last/current codec loaded/used = None
TDM timeslot = 0
Resource (vdev_common) status = 401 means :active others
tot ingress data = 101
tot ingress control = 1194
tot ingress data drops = 0
tot ingress control drops = 0
tot egress data = 39722
tot egress control = 1209
tot egress data drops = 0
tot egress control drops = 0
slot = 6 virtual voice dev (tag) = 1 channel id = 2
capabilities list map = 9FFF
last/current codec loaded/used = None
TDM timeslot = 1
Resource (vdev_common) status = 401 means :active others
tot ingress data = 21
tot ingress control = 1167
tot ingress data drops = 0
tot ingress control drops = 0
tot egress data = 19476
tot egress control = 1163
tot egress data drops = 0
tot egress control drops = 0
Table 5 explains the fields in the sample output.
Table 5 show vrm vdevice Field Descriptions
Field Description
slot Slot where voice card is installed.
virtual voice dev (tag) Identification number of the virtual voice device.
channel id Identification number of the channel associated with this virtual voice device.